Battery Specifications

    

Most of our products use a 9 Volt Battery

The manufacturer of the lock highly recommends the use of eater Duracell or Energizer 9 Volt Alkaline battery, with a 5 year ahead expiration date, the expiration date can be located eater on the side of the battery or stamped on the bottom, not use rechargeable or Litium batteries. 

• Related Articles

• Constant Beeping

  A constant beeping sound from your keypad may occur due to: Low battery Internal reset after a battery change Temporary keypad interference If you are experiencing continuous beeping, try the following steps: ? Check the Battery Use Duracell or ...

• Handle Spins

  ? The Handle of My Safe Spins Freely – What Can I Do? If the handle of your safe spins freely, it may be caused by one of the following factors: 1. Loose Set Screws The set screws of the handle may be loose and need to be tightened. At the bottom ...

• Safe Not Opening

  Safe Not Opening If your safe is not opening, it may be caused by: Low battery Incorrect combination entry ? Step 1 – Check Battery and Code Make sure you are entering the correct combination. ✅ Two beeps or a green light = correct code. ❌ Single ...

• How do I program my safe code?

  How do I program my safe code? To program your safe, follow these steps: Identify your lock type. Refer to the image and select the keypad that matches your safe model to get the correct instructions. Lock Type H Instructions. Ensure the safe is open ...